Colour-Matched Components for Complete Cladding Systems
A cladding system is only as consistent as the trims and fixings holding it together. QC Architectural finishes every component required to complete a full architectural envelope, colour matched to the primary product.
Trims, Fixings and Accessories We Can Finish
- Aluminium angles, trims and corner profiles
- PVC trims and edge sections
- Nails, screws and fixings
- Flashings and capping
- Timber trims and reveal sections
Colour-Matched From Board to Fixing
Trims and accessories are batch processed alongside the primary cladding or panelling order. Same colour reference, same coating system, same factory environment. Orders are packed with the primary product, so everything arrives on site together and installs with a consistent finish from the first board to the last fixing.
Frequently Asked Questions
Where are you located and do you service nationally?
We are based in Carole Park, Queensland. Yes, products can be delivered to construction sites and supply partners nationally.
Can I supply my own materials for coating?
Yes. Manufacturers, distributors and builders can supply their own substrate and we will apply factory coating systems to specification. Timber, fibre cement, plywood and aluminium are all accepted.
Do you coat trims, fixings and accessories to match?
Yes. We coat everything required to complete a full cladding system. Nails, screws, aluminium angles, plastic trims and other accessories can all be finished to match the primary product, so everything that goes on the wall is consistent from the cladding to the last fixing.
What coating systems do you use?
Water based, oil based, solvent based and 2K fluoropolymer. If it goes on timber, fibre cement, plywood or aluminium, we are set up to apply it.
Do your products come with a warranty?
Yes. All factory applied coatings are applied by accredited applicators using approved systems. Warranty terms vary by product and coating system and will be confirmed at the time of order.
How do I place an order or get pricing?
Get in touch with your requirements and we will respond within one business day. Provide profile, quantity in lineal metres or square metres, desired finish and colour, and whether you are supplying timber or would like us to source it. We return quotes fast so you can keep your project moving.
What are your typical lead times?
Lead times depend on the process. Pre-oiling is generally 3 to 5 days. Vacuum coated finishes are 10 to 14 days. Custom 2K panel finishes are 14 to 21 days. As a rule, allow a minimum of 14 days from receipt of goods. Lead times may extend during peak periods.
Is there a minimum order quantity?
Minimum order quantities vary by service:
- Vacuum coating — 500 lineal metres
- Oiling — 500 lineal metres
- Panel line — 25m²
- Priming — 1,000 lineal metres
- Sanding and calibration — 1m²
Orders under a set amount are subject to a $120 setup fee.
Do you offer custom colour matching?
Yes, we can match custom colours on certain products. We use an in-house spectrometer and colour matching process, which takes up to 14 days. A physical sample is required and must be signed off by you before we procure any material.
